Kromek Logo black

Electronics & Preamplifiers Please use the tabs above to view the Kromek range of preamplifiers.. Product #: Preamplifiers

Electronics & Preamplifiers


Please use the tabs above to view the Kromek range of preamplifiers

eV 550

550 1

The eV-550 preamplifier is essentially a charge-to-voltage converter. Charge carriers from a detector on the input, generated by ionizing radiation, provide a proportional voltage at the output. The eV-550 is designed for maximum flexibility in a wide range of applications.

The eV-550 is available with any of the four (4) standard eV Products hybrid preamplifiers (see separate data sheet) and incorporates a BNC connector for the input.

Applications:

Semiconductor detectors (Si, Ge, CZT, HgI2, etc.); channel electron multiplier arrays (CEMA), ideally suited for resistive anode readouts; photodiode detectors; proportional gas detectors for charged particles or neutrons.

The eV-509x product family is a low-noise, general purpose charge sensitive preamplifier designed to exhibit excellent performance with detectors having various source capacitances. 
The eV509x series works with the eV-550

 

eV-5091

Description:

The eV-5091 is a low-noise, general purpose charge sensitive preamplifier designed to exhibit excellent performance with detectors having a source capacitance of 1-100 pF

Applications:

This preamplifier is intended for use with CZT detectors, Si surface barrier detectors and photodiodes, HgI2, proportional gas counters and multi-channel plate arrays with and without resistive anode readouts. Board dimensions are 0 .810" x 0.600" with 8 pins along one edge (0. 100" center to center spacing).

 5091 combined

eV-5092

Description:

The eV-5092 is a low-noise charge sensitive preamplifier designed to be used with detectors having a wide range of capacitance (100- 1000 pF).

Applications:

This preamplifier is intended for use with CZT detectors, Si surface barrier detectors and photodiodes, HgI2, proportional gas counters and multi-channel plate arrays with and without resistive anode readouts. Board dimensions are 0 .810" x 0.600" with 8 pins along one edge (0. 100" center to center spacing).

 5092 combined

 

 

 

 

 

eV-5093

Description:

The eV-5093 is an ultra low-noise, charge sensitive preamplifier designed to exhibit excellent performance with detectors having a source capacitance of 1-100 pF.

Applications:

This preamplifier is intended for use with CZT detectors, Si surface barrier detectors and photodiodes, HgI2, proportional gas counters and multi-channel plate arrays with and without resistive anode readouts. Board dimensions are 0 .810" x 0.600" with 8 pins along one edge (0. 100" center to center spacing).

 5093 combined

 

 

 

 

 

eV-5094

Description:

The eV-5094 is an ultra low-noise charge sensitive preamplifier designed to be used with detectors having a wide range of capacitance (100-1000 pF).

Applications:

This preamplifier is intended for use with CZT detectors, Si surface barrier detectors and photodiodes, HgI2, proportional gas counters and multi-channel plate arrays with and without resistive anode readouts. Board dimensions are 0 .810" x 0.600" with 8 pins along one edge (0. 100" center to center spacing).

 

5094 combined

 

 

 

 

 

eV-080

The simplest mounting style available, the eV-080 consists of an alumina (Al2O3) substrate and a CZT detector crystal. Suitable for incorporation into a shielded housing, the eV-080 is designed for maximum flexibility in a small package.

ev080

 

 

 

 

eV-180

The eV-180 is mounted directly to the back of a standard BNC connector. This allows the eV-180 to be easily connection to standard Nuclear Instrumentation Modules or an eV-550 using any of the eV Products standard charge sensitive preamplifiers. The housing comes in 30 mm OD or 12 mm OD (1.25" OD or 0.5" OD), depending on the detector crystal size.

ev180

 

 

 

 

eV-480

The eV-480 accommodates semiconductor crystals in an easy to use test fixture with a standard BNC connector. This allows the eV-480 to be easily connected to an eV-550 preamplifier box or Nuclear Instrumentation Modules. This design enables different size planar contacted detectors to be tested within the same configuration for ease in scientific experiments.

ev480

 

 

 

 

Download the eV-550 datasheet

UKTo download the A4 English datasheet click here
USATo download the US Letter English datasheet click here
ChinaTo download the A4 Chinese datasheet click here

Download the eV-509 series datasheet

UKTo download the A4 English datasheet click here
USATo download the US Letter English datasheet click here
ChinaTo download the A4 Chinese datasheet click here

Download the eV-80 series datasheet

UKTo download the A4 English datasheet click here
USATo download the US Letter English datasheet click here

Contact Us

 
 
Kromek Group plc, NETPark, Thomas Wright Way,
Sedgefield, County Durham TS21 3FD United Kingdom

Tel: +44 (0) 1740 626060 Fax: +44 (0) 1740 626061

Registered in England and Wales number 8661469

icon linkedin icon twitter

We're on twitter

 

9001

© Copyright Kromek Group plc. All Rights Reserved.